Expert Answers in Ceramic and Porcelain Tile

ANSWER - Porcelain tiles are not likely to peel considering they are very dense tiles.  Although you say the tile is Carrara Marble look and the edges are white.  Manufacturers use the ink jet technology…

ANSWER - A true porcelain tile will not degrade or bleed that would cause a residue on the surface of the tile that would transfer to your socks.   Porcelain tile is very dense and fired…

ANSWER - To determine what adhesive to use to install a time you need to determine what is the substrate.  You need to know what type of tile you are going to install.  In Trailer…

ANSWER - There are sealers called penetrating sealers that seal the tile but doesn't change the appearance of the tile. These is a product called Miracle 511 Impregnator Porous Plus meant for high absorbing tiles…

ANSWER - Based on the Schluter literature, although they only show floor applications, they don't say it is only for floors. The Ditra is waterproof if installed correctly for waterproofing.  It does have a key…

ANSWER - Carpet might be allowing the moisture to evaporate through it, but as dirty as carpets get you could develop some microbial growth in the carpet.  Adding more carpet doesn't solve or prevent problems.…

ANSWER - Tiles should not lose their color from cleaning.  There are a lot of variables to consider.  First what kind of tile is it and how was it manufactured.  I will assume it is…

ANSWER - If you are using a cementitious grout it should harden.  If you used too much water in mixing the grout and/or too much water in cleaning the grout during the installation of the…

ANSWER - It depends on the application on whether waterproofing under a tile installation is necessary.  If it is in a wet application and in some exterior applications, then it is necessary to waterproof the…

ANSWER - If you rub too hard you might damage the tile. The best approach is to contact the manufacturer of the urethane grout and ask them how best to remove the urethane grout haze. …