Ceramic and Porcelain Tile Grout installation Standards Waterproofing

What is the Max Acceptable Vapor Transmission for Porcelain Tile w/ Epoxy Grout?

ANSWER - The allowable vapor emission rate depends on what installation and tile products you are using. Generally speaking the standard for the floor covering industry and what most installation product manufacturers publish is 3…

Read More
Ceramic and Porcelain Tile Exterior installation Waterproofing Wet Areas

How do I install Mosaic Tiles to be Freeze Thaw Proof?

ANSWER - First you need to verify that your mosaic is frost proof/freeze thaw stable.  If it is porcelain or vitreous clay tile it is possibly frost proof.  If it is a stone mosaic then it…

Read More
Ceramic and Porcelain Tile installation selection stone

What type of Tile should I use on my Patio?

ANSWER - Porcelain tile is considered one of the best tiles in terms of durability and resistance to moisture.  There are other types of ceramic tile that will perform well too, but you need to…

Read More
Ceramic and Porcelain Tile cracks Debonding Tile failures Grout Hollow Sounding Tiles Movement Joints Standards

Why is Ceramic Tile Hollow and Grout Cracking on New Floor?

ANSWER - When there is ceramic tile or stone failures it is normally due to compounding issues. There could be excessive movement beyond the industry limit of L/360 deflection, but your subfloor description sounds substantial.…

Read More
Ceramic and Porcelain Tile cracks Debonding Tile failures Grout Hollow Sounding Tiles

Help With Ceramic Tile Not Adhering and Grout Cracking

ANSWER - Regarding your description of your tile problem I will give you some input. We do inspections around the country, so we can be hired to investigate your problem (click here…

Read More
Ceramic and Porcelain Tile Debonding Tile failures

Some areas of tile over concrete has broken bond

ANSWER - Normally when tile looses bond it is because of compounding issues.  I would check to see if they left some carpet mastic or a residue of it that may be acting as a bond…

Read More
Ceramic and Porcelain Tile installation Removal

Is there any way to get ceramic tile up without damaging it?

ANSWER - The only time this might be possible is if the ceramic tile had been installed poorly. Particularly if the adhesive used did not bond well to the ceramic tile, then it might be…

Read More
Ceramic and Porcelain Tile cleaning sealers Stains

White bloom on Mexican Tile that got flooded

ANSWER - What you are describing may be the result of using a surface non-breathable sealer over your Mexican pavers. The moisture from the flood may have migrated through the grout joints, or else where,…

Read More
Ceramic and Porcelain Tile cleaning

How to remove scratches on glazed ceramic tile?

ANSWER - Generally speaking you can't remove scratches from glazed tiles unless they are very slight. There is no standard method for removing scratches in glazed ceramic tiles. That is assuming you do mean a…

Read More
Ceramic and Porcelain Tile cracks failures

Is the cold Cracking the Tile?

ANSWER - Cold weather should not cause ceramic tile to crack particularly if it is an interior application.  It is possible that if you have a very porous ceramic tile that you have installed outdoors for…

Read More